SPONSORED LINKS

Jerking motions when you step on gas

Tiny
TTOCS69
  • MEMBER
  • 2008 CHRYSLER PT CRUISER
  • 69,000 MILES
So when I was on my way home my engine light came on there was no issue right away, then when I got to a street light I stopped when I pressed down on the pedal started******** then I lightly pressed down on the pedal slowly got up to 60 if I went down on it to hard started******** again. When I got home I check tranny fluid was good to go. I took it for a drive again it was not doing it anymore but light is still on any thoughts
SPONSORED LINKS
Thursday, October 6th, 2011 AT 1:29 AM

1 Reply

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,867 POSTS
It sounds like the engine started missing. This can be caused by many things. What I need you to do is have the computer scanned. Most parts stores will do it for free. If the light was flashing, there will be a trouble code stored in the computer that will identify where the problem was coming from.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, October 6th, 2011 AT 1:31 AM

Please login or register to post a reply.

Related Transmission Fluid Add Fluid Content

Transmission Fluid Check and Add - Automatic
GUIDE
Transmission Fluid Check and Add - Automatic
An automatic transmission or transaxle fluid dipstick handle is located toward the rear of the engine or near the transaxle. Checking and adding automatic transmissions ...
VIEW MORE

Sponsored links