When the vehicle ignition is in the on position, both brake lights (not running lights) dont come on, even with the brake light switch replaced?
Jul 19, 2013 at 8:33 AM
Brake lights dont not work?
2008 CHRYSLER PT CRUISER
GROUNDLESS
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
If the third brake light works then the switch is not the issue. If that is the case then the TIPM is the issue.
Please see below for the wiring diagram that will help with what we need to test.
Here is a guide that will help with this testing:
https://www.2carpros.com/articles/how-to-check-wiring
I also attached the process for replacing the TIPM as I suspect this is the issue.
Please let us know if you have other questions. Thanks
Please see below for the wiring diagram that will help with what we need to test.
Here is a guide that will help with this testing:
https://www.2carpros.com/articles/how-to-check-wiring
I also attached the process for replacing the TIPM as I suspect this is the issue.
Please let us know if you have other questions. Thanks
Images (Click to enlarge)
Jun 10, 2021 at 6:24 PM
Advertisement