2008 Acura CSX Security doesn't go off?

2008 ACURA CL
350 MILES • MANUAL
Avatar
HAMZA305
  • MEMBER
  • 2 POSTS
2008 Acura csx, key was stuck, mechanic messed up alarm system, alarm doesn't go off, original key doesn't work (remote)
May 4, 2026 at 10:01 AM
Advertisement
Avatar
STRAILER
  • CAR REPAIR CONTRIBUTOR
  • 54,354 POSTS
This sounds like the repair may have affected the keyless entry/security control system, the ignition switch/key cylinder area, or the immobilizer antenna/receiver wiring around the steering column. So if the immobilizer was damaged it will need to be replaced, also have you replaced the battery inside the remote? Here is what the part looks like and a video to help you change the battery out

https://www.youtube.com/watch?v=KcDPt3mKeAA&pp=ygUbYWN1cmEgcmVtb3RlIGJhdHRlcnkgY2hhbmdl

Check out the images (below). Please let us know what happens.
Image (Click to enlarge)
Attached Media
May 5, 2026 at 2:34 PM
Avatar
HAMZA305
  • MEMBER
  • 2 POSTS
The immo was changed, when I try to pair the immo again with the car using the obd, it’s shows it detects it, but then always has a communication error regardless which setting I click
May 6, 2026 at 1:53 AM
Avatar
STRAILER
  • CAR REPAIR CONTRIBUTOR
  • 54,354 POSTS
Yep, so the system will need to be programmed. I mobile locksmith can do it for about $250.00 or you can have it towed tot he dealer or a shop that has the capability. You cant bypass the security system, it is part of the car.
May 6, 2026 at 5:31 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.