2007 Volkswagen Golf M Drivng Clastur Turns Off Resert Time Millage Off Day

2007 VOLKSWAGEN GOLF
80,500 MILES
Avatar
RYTHM
  • MEMBER
  • 3 POSTS
When m drivng my clastur turns off, it resert time, millage off the day and tape 2. Sometimes it happen when i indicate/turn my light bright or hit the breakes. And sometime it back fires. Bt it does not happen everyday, it come unexpected
Oct 19, 2012 at 10:25 AM
Advertisement
Avatar
ASEMASTER6371
  • ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
check all battery connection, powers and grounds. sounds like you have a bad connection somewhere.

Roy
Oct 19, 2012 at 10:36 AM
Avatar
RYTHM
  • MEMBER
  • 3 POSTS
The other day, i tried to lock it vaya mobelizer, only to find out dat it was off totaly .i mean there was no power then i open de hood to check to my suprise i touched + terminal then the power come back. The i cleaned all terminals and tied them tied. Bt i still have the same problem
Oct 19, 2012 at 11:41 AM
Avatar
RYTHM
  • MEMBER
  • 3 POSTS
Can it be the + terminal having a short?
Oct 19, 2012 at 12:00 PM
Avatar
F4I_GUY
  • ASE Certified Mechanic
  • 3,302 POSTS
  • ASE Certified Mechanic
Get a voltmeter and do a voltage drop test across the battery terminals and cables.

Place one lead on the actual battery terminal (do not touch the cable or the cable leads). Now place the other lead on the battery lead. Have a friend crank the engine. Set the voltmeter on 2DCV, your reading should be no higher than 0.2V. Ideally, you should have a very low reading (around 0.01-0.1v). Do this test all the way up to the underhood fuse box, just follow the positive battery cable.

Oct 30, 2012 at 10:23 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.