2007 Toyota Camry slave and master clutcg cylinder

2007 TOYOTA CAMRY
2.4L • 4 CYL • 2WD • MANUAL
Avatar
RLAZARO
  • MEMBER
  • 2 POSTS
Replaced the slave cylinder could not get air or of system. Want to change master. clutch cylinder .Its completely loose but I have very little space. How do I get the master cylinder out?? I have only a three inch opening.please help
Sep 30, 2014 at 7:37 PM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
see pics
Images (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Oct 1, 2014 at 6:48 AM
Avatar
RLAZARO
  • MEMBER
  • 2 POSTS
Thanks I was able to swap master cylinder but I'm still having no pressure on clutch pedal. I'm trying to bleed the air out but no avail. Am I missing something? New slave new master all lines hooked up. What else could it be.
Oct 3, 2014 at 9:41 AM
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
try apower bleeder it should work if bled correctly. was master bled prior to install if not it's still got air in system. see if slave is getting fluid from master when yo bleed it cold be the slave cylinder as well.
Oct 3, 2014 at 12:52 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.