The abs light and engine lights come on

2007 TOYOTA CAMRY
Avatar
WILLC15
  • MEMBER
  • 1 POST
Also the speedometer stops working. I took it to the Toyota dealership and they first said that it was the left brake sensor. They fixed it and then called me and said that it was the brake actuator.

I took it for a second opinion and the codes read Codes of P0500 Veh. Speed Sensor, als C0200-R/F Speed Sensor, C0205 - L/F Speed Sensor, C0215-L/R Speed Sensor along with C0331- Left Front Speed Sensor- Open Circuit. He suggested that this meant that the new sensor was also bad and that it needed to be replaced again.

Does this seem like the case or do you believe that it is actually the brake actuator. It is a 2000 dollar part and am needing all input before I do it.

Also if that is the case would it be ok to drive it as is until I can save the money to get it fixed?
Jan 28, 2011 at 2:29 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
KASEKENNY
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 18,907 POSTS
Any time you have codes for multiple speed sensors then it is normally the module as it is unlikely that multiple sensors will fail at the same time.

https://youtu.be/rTtAnsOlZU4

There are a few ways to test the sensors and here are a couple guides that cover this info:

https://www.2carpros.com/articles/abs-wheel-speed-sensor-test

https://www.2carpros.com/articles/how-to-replace-an-abs-wheel-speed-sensor

However, I would suggest we start with running through this testing to find out what the possible issues are.

This info is from the manual and will get us started down the path to confirming the actuator is the issue.

Let us know what questions you have.

Thanks
Jan 27, 2022 at 2:39 PM
Advertisement