How do I replace the stop light switch?
Dec 9, 2012 at 4:59 AM
2007 Nissan Versa Replace Stop Light Switch
2007 NISSAN VERSA
ANONYMOUS
- MEMBER
- 1 POST
Advertisement
KHLOW2008
- ✓ASE Certified Mechanic
- 41,814 POSTS
ADJUSTMENT
1. Disconnect stop lamp switch connector.
2. Loosen stop lamp switch by rotating it counterclockwise by 45°.
3. Reinstall new switch.
4. With the pedal pulled and held by hand, press stop lamp switch until its threaded end contacts brake pedal lever.
4. With the threaded end of stop lamp switch contacting brake pedal lever, rotate the switch clockwise by 45° to secure.
5. Check the pedal play.
CAUTION:
Make sure that stop lamps go off when brake pedal is released.
1. Disconnect stop lamp switch connector.
2. Loosen stop lamp switch by rotating it counterclockwise by 45°.
3. Reinstall new switch.
4. With the pedal pulled and held by hand, press stop lamp switch until its threaded end contacts brake pedal lever.
4. With the threaded end of stop lamp switch contacting brake pedal lever, rotate the switch clockwise by 45° to secure.
5. Check the pedal play.
CAUTION:
Make sure that stop lamps go off when brake pedal is released.
Images (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Dec 9, 2012 at 8:30 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.