SPONSORED LINKS

2007 Mazda 6 keyless entry not working

Tiny
SKRNOOPURAM
  • MEMBER
  • 2007 MAZDA 6
  • 142,000 MILES
My Mazda 6 2007 model keyless entry is not working since when I purchased it. Engine is starting by this key, immobilizer is working (I tried with a duplicated key, engine got starting and immediately stopping), but no panic alarm, no door lock/open by remote. Every time I have to insert key to open the door. I tried programming procedure mentioned by some one in the web sites by open/close door lock, switch on key to on position three times within 10 seconds then door close/open three times etc and in vain. Can you anybody help me.
with thanks.
SPONSORED LINKS
Sunday, September 29th, 2013 AT 1:59 AM

5 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Have it scanned by a pro to figure out what is wrong it will need scanning. You can check all your fuses however it may be that.
Was this
answer
helpful?
Yes
No
Sunday, September 29th, 2013 AT 6:33 AM
Tiny
SKRNOOPURAM
  • MEMBER
  • 7 POSTS
All of my fuses are ok.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, September 29th, 2013 AT 12:06 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Then have it scanned so they can see if it works ornot youcan take the key fob to an auto parts and they can check that to seeif that is working.
Was this
answer
helpful?
Yes
No
+1
Sunday, September 29th, 2013 AT 3:36 PM
Tiny
SKRNOOPURAM
  • MEMBER
  • 7 POSTS
In my fuse box cover under hood, some labels are marked in brackets. Like (Power Window) etc. What does this meant for. Also some fuses I checked and found there is no pin at one side of the socket, means even if you insert fuse (box type especially) there will be no continuity in connections. Others have two pins and both will go inside of the box type fuses. Is it broken before or it is like that means for future use or optional use.
Was this
answer
helpful?
Yes
No
Saturday, October 5th, 2013 AT 8:29 AM
Tiny
SKRNOOPURAM
  • MEMBER
  • 7 POSTS
One more doubt I that how can I find out my car is L3 or L3 with TC etc. This is required to read electrical wiring drawing of the car. In the drawing it is mentioned especially for some fuses this is applicable for L3 and somewhere for L3 with TC like that. If anyone know about this, please share.
Thanks.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, October 5th, 2013 AT 8:33 AM

Please login or register to post a reply.

Sponsored links