How come it shift throw 1 2 3 fine but will not go in to 4th.

Tiny
ACCENT 07
  • MEMBER
  • 2007 HYUNDAI ACCENT
  • 96,000 MILES
I change the trans in my car the new one goses in to 123 fine but will not go in to 4th.(The old one would go in to 1&2&that it)them when I stop&take off it stays in 3rd. If I turn off the car&start it it will do the same thing. The code that comes up is p0760scsv c(2nd solenoid)-open/short (that was the same as the last trans.I tested the scsv c and came back fine. Could it be what ever tell the trans to shift?
Thursday, January 12th, 2012 AT 9:39 PM

1 Reply

Tiny
BMRFIXIT
  • MECHANIC
  • 19,053 POSTS
- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid C valve
- Shift solenoid C valve harness or connectors
- Shift solenoid C valve circuit is open or shorted
When is the code detected?
The P0760 code is detected when the TCM detects an improper voltage drop when it tries to operate the solenoid valve
Was this
answer
helpful?
Yes
No
Friday, January 13th, 2012 AT 12:28 AM

Please login or register to post a reply.

Related Transmission Replace/Remove Content

Automatic Transmission Replacement
VIDEO
Automatic Transmission Replacement
In­struc­tional re­pair video
Transmission Replacement - Automatic RWD
GUIDE
Transmission Replacement - Automatic RWD
An au­to­matic trans­mis­sion is de­signed to trans­fer power form the en­gine to the drive wheels while shift­ing gears au­to­mat­i­cally. The fol­low­ing is a guide show­ing the step by...
VIEW MORE