Does any one have any ideas and how it fix it. The rattle sounds like it is coming from the passengers side seat.
Feb 6, 2012 at 3:32 AM
I hear a rattling sound coming from the passengers side of my car when I drive
2007 HUMMER H3
MWATTERSON
- MEMBER
- 40 POSTS
Advertisement
RIVERMIKERAT
- ✓ASE Certified Mechanic
- 6,110 POSTS
Make sure the nuts that secure the seat rails to the floor are tight.
Feb 6, 2012 at 3:50 AM
I tightened the nuts to the rail. It did not work. Is there a way to tighten the seat back? Thank you
Feb 6, 2012 at 3:58 AM
RIVERMIKERAT
- ✓ASE Certified Mechanic
- 6,110 POSTS
Front seat or rear? The rear seat seat back is bolted at the bottom. You'll need to remove the bottom.
The front seat back pivot points may be able to be tightened. I don't have one handy to look.
The front seat back pivot points may be able to be tightened. I don't have one handy to look.
Feb 6, 2012 at 4:11 AM
It is the front seat
Feb 6, 2012 at 4:14 AM
RIVERMIKERAT
- ✓ASE Certified Mechanic
- 6,110 POSTS
See image
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Click here to log in and view diagram.
Feb 6, 2012 at 4:27 AM
Sadly enough it may be your ball bearing on the front right wheel if you feel the vibration on the floor or the gas/brake pedal.
Mar 23, 2012 at 2:35 AM
RIVERMIKERAT
- ✓ASE Certified Mechanic
- 6,110 POSTS
I'm guessing the sound goes away when somebody sits in the passenger seat.
Mar 23, 2012 at 2:42 AM
Yes the sound does go away when someone sits in th seat!
Mar 23, 2012 at 5:38 AM
The Rattle on my 2007 Hummer H3, that sounded like it was behind the glove box, was vibrating at lower engine speed. Turns out my heater hose was laying against the transmission dipstick causing the heater core to vibrate inside the car. So I just bent the dipstick forward about a half inch and it fixed the noise. I was a piece of cake.
Oct 8, 2019 at 7:21 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.