Do you have to have the throttle bottle sensor scaned into computer of the 07 mustang
Mar 13, 2012 at 11:59 PM
Throttle Body Position Sensor On 07 Mustang
2007 FORD MUSTANG
BLOPER
- MEMBER
- 3 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
if you mean flashed after replacement, no. you clear the code and go. if the light is still on from this, the pedal sensor and module may have to be replaced.
Roy
Roy
Mar 14, 2012 at 12:25 AM
Advertisement
My 07 mustang has no throttle response after cleaning throttle body, i have replaced the throttle body motor and i still get no response i have no clue what it is can you help. i figure maybe its the TPS or the peddle sensor in it...
Mar 14, 2012 at 10:09 PM
try removing the battery cable and installing it to re boot.
Roy
Roy
Mar 14, 2012 at 10:10 PM
i have tried that several time it doesnt work. when i push the gas it does nothing it doesnt respond i have been trying to figure it out since sunday...
Mar 14, 2012 at 10:17 PM
you need help here to verify the pedal sensor failure. a shop with a scan tool can see if it is working to verify which part has failed. the sensor on the pedal is around 550 and the throttle body is around 600-700.
Roy
Roy
Mar 14, 2012 at 10:47 PM