Multifunction switch replacement instructions

2007 CHRYSLER PT CRUISER
42,100 MILES • 4 CYL • AUTOMATIC
Avatar
TMILLE19
  • MEMBER
  • 1 POST
I have a 2007 pt crusier convertible, the turn signal that controls lights inside and out not working as will as the wiper controler not working is this a multifunction switch problem?
Aug 19, 2011 at 3:40 AM
Advertisement
Avatar
KASEKENNY
  • CERTIFIED EXPERT
  • 18,907 POSTS
Yes, there could be another issue but this is most always a switch issue on this vehicle.

The way to confirm this is to check for voltage coming out of the switch. I am attaching the wiring diagram for you to be able to look for voltage coming out for the wipers. If this is causing the wiper issue then it is going to be causing the light issue as well. So let's just stick with this and go from there.

Here is a guide that will help with this type of testing:

https://www.2carpros.com/articles/how-to-check-wiring

Assuming this is correct, I attached the replacement process on the steering control module which is what they call this on this vehicle.

Please run through this and let us know if you have other questions. Thanks
Jul 21, 2021 at 2:07 PM