What would cause the battery, gas, speedometer, tachometer, and temperature gauges to stop working?

2007 CHRYSLER PACIFICA

40,000 MILES

GTATRANSAM88

MEMBER
1 POST
FOLLOW

The cluster will light up and so will the mileage and gear selector box in the lower right of the cluster, but none of the gauge needles will move. car starts and runs fine.

I heard the TIPM could cause this. What is that? Where is it? How do I replace it if that is the cause?

Sep 12, 2011 at 11:39 PM

Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.

JACOBANDNICKOLAS

CAR REPAIR CONTRIBUTOR
110,190 POSTS

Hi,

The TIPM is a totally integrated power module. It is located under the hood and is where you will find the fuses for the vehicle.

As far as the TIPM, they are known to have connector issues because of the number of small connector pins. They corrode and can break.

If you look at the attached pics below, I provided the directions for the removal and replacement of the TIPM. Also, if you plan to check wiring, here is a link you may find helpful:

https://www.2carpros.com/articles/how-to-check-wiring

I hope this helps. Let me know if you have other questions.

Take care.

Joe

See pics below.

Images (Click to enlarge)

Jul 19, 2021 at 9:13 PM