2007 Chrysler Pacifica turn signals

2007 CHRYSLER PACIFICA
132,000 MILES • 4.0L • V6 • FWD • AUTOMATIC
Avatar
MALPASO9
  • MEMBER
  • 4 POSTS
when i turn left or right the turn signal in dash flashes very fast, but non of the bulbs are flashing left, or right front or back. fuses are all OK as are all bulbs. everything else electrically are working fine.
i'm stumped
Apr 22, 2015 at 9:15 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
have a prro scan it the integrated power module may be bad or not sending power to lights.
Apr 22, 2015 at 9:46 AM
Avatar
MALPASO9
  • MEMBER
  • 4 POSTS
do you mean the BCM ?

Could it be the multi function switch?
Apr 22, 2015 at 11:15 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
it is not the bcm Chrysler uses a module and puts practically everything through it like the starter, lights and other things. this module is under hood on lh side of vehicle.
Apr 22, 2015 at 12:00 PM
Avatar
MALPASO9
  • MEMBER
  • 4 POSTS
do you mean the main fuse box?

thanks
Apr 22, 2015 at 12:03 PM
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
you would probably call it that but it' s actually a module and controls different areas of car.. see pic
Image (Click to enlarge)
Attached Media
Apr 22, 2015 at 12:10 PM
Avatar
MALPASO9
  • MEMBER
  • 4 POSTS
thank you so much for your quick answers.

Should I check any particular fuse or relay!
Apr 22, 2015 at 12:17 PM
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
you can if you want but I don't think it will help.
Apr 22, 2015 at 1:22 PM