How do you replace the front struts on a 2007 Chevy Tahoe with Air ride system.
May 14, 2014 at 2:05 PM
2007 Chevrolet Tahoe Front Strut
2007 CHEVROLET TAHOE
B2BOLD
- MEMBER
- 1 POST
Advertisement
TY ANDERSON
- ✓ASE Certified Mechanic
- 719 POSTS
It is going to require a special tool to compress the coil spring to release the strut from the coil spring. If you have that or access to it you'll need it. Air tools are a must to replace the struts.
Disconnect the sensor from the end of the strut shaft after removing the electrical connector.
Remove the strut from the vehicle.
Then remove the nut on strut shaft after compressing the coil spring. Then take note of the order of parts coming off of the strut. Reassemble in reverse order.
Disconnect the sensor from the end of the strut shaft after removing the electrical connector.
Remove the strut from the vehicle.
Then remove the nut on strut shaft after compressing the coil spring. Then take note of the order of parts coming off of the strut. Reassemble in reverse order.
May 14, 2014 at 9:35 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.