2007 Chevrolet Silverado Wheel bearing

Tiny
CNEAL99
  • MEMBER
  • 2007 CHEVROLET SILVERADO
  • V8
  • 4WD
  • AUTOMATIC
  • 157,000 MILES
The bearing on thie driver front is going bad and I was wondering if a 2011 hub assembly was interchangeable.
Friday, September 4th, 2015 AT 5:35 PM

1 Reply

Tiny
CJ MEDEVAC
  • MECHANIC
  • 11,005 POSTS
DID NOT PROVIDE ENOUGH INFORMATION FOR ME TO RESEARCH THIS

I'LL LET YOU IN ON THE SECRET WAY TO FIND THIS STUFF OUT

GO TO AN ONLINE AUTO PARTS STORE (ADVANCE AUTO PARTS/ AUTOZONE/ ROCK AUTO/ ETC.)

INSTALL THE CORRECT VEHICLE INFO IN THE "MY VEHICLE" SECTION

IN THE SEARCH BOX, INSTALL THE DESIRED PART

WHEN IT COMES UP, WRITE DOWN THE PART NUMBERS FOR VEHICLE # 1

THEN CHANGE VEHICLES (THE OTHER ONE), INSTALL IT'S INFO

DO THE SAME SEARCH FOR THE PART, WRITE 'EM DOWN

COMPARE THE PART NUMBERS YOU WROTE DOWN

IF THEY ARE THE SAME - THEY SHOULD INTERCHANGE

YOU MAY HAVE TO CLICK ON THE PART AND INSURE WITHIN ITS SPECS/ WRITE-UP, IT WILL DEFINITELY FIT A FOUR WHEEL DRIVE OR ANY OTHER SPECIFICS THAT BOTH VEHICLES HAVE

WAS THAT CLEAR OR DO I NEED TO EXPLAIN IT ANY BETTER

THE MEDIC
Was this
answer
helpful?
Yes
No
Friday, September 4th, 2015 AT 8:12 PM

Please login or register to post a reply.

Sponsored links