2007 Chevrolet Impala code p24306

Tiny
SOCONNOR3709
  • MEMBER
  • 2007 CHEVROLET IMPALA
  • 130,000 MILES
I had codes p2430 & p0411 on my impala I replaced the canister vent solenoid in the back of car and a vent solenoid sensor in engine h p0411 the code never came back but I'm stuck with p2430 It's now pending I'm lost what is causing the problem & the secondary air pump is expensive I don't want to purchaser and not fixed problems
Sunday, June 9th, 2013 AT 1:57 PM

5 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
That code is the secondary air pump sensor is stuck in range you can try replacing the solenoid that may cure it. See pic
Was this
answer
helpful?
Yes
No
Monday, June 10th, 2013 AT 7:34 AM
Tiny
SOCONNOR3709
  • MEMBER
  • 3 POSTS
Thanks alot that sounds like a possible solution & looks like the correct photo even with my engine being the 3.5l I will check it out today
Was this
answer
helpful?
Yes
No
Monday, June 10th, 2013 AT 7:45 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Next time give engine size, it still could be an evap problem and would need to be smoke tested for leaks.
Was this
answer
helpful?
Yes
No
+1
Monday, June 10th, 2013 AT 7:47 AM
Tiny
SOCONNOR3709
  • MEMBER
  • 3 POSTS
Yeah its a secondary sensor code code didn't come on this morning with ac and defroster on could it be possible my small knocks on the valve may have loosened it temp I just need to pass emissions then I'll take time more investigating
Was this
answer
helpful?
Yes
No
Monday, June 10th, 2013 AT 8:08 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Knocking on it could have time will tell
Was this
answer
helpful?
Yes
No
+1
Monday, June 10th, 2013 AT 8:22 AM

Please login or register to post a reply.

Sponsored links