2007 Cadillac Escalade wheels sliding

2007 CADILLAC ESCALADE
155,000 MILES • 5.7L • V8 • 4WD • AUTOMATIC
Avatar
TJSMIT1
  • MEMBER
  • 2 POSTS
only when I turn the steering wheel from left to right the wheels will start sliding from the vehicle breaking on its own as long as I am driving straight the wheel will not slide or break I have replaced the steering wheel position sensor and there are no codelight on but my wheels are still sliding and breaking on their on.
Nov 4, 2015 at 8:17 PM
Advertisement
Avatar
HMAC300
  • ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
have a pro scan for codes, the code light only comes on for engine/trans/air bag/abs and nothing else. it may be a sensor problem or something screwing up in abs but not showing a code.
Nov 5, 2015 at 6:17 AM
Avatar
TJSMIT1
  • MEMBER
  • 2 POSTS
this does not help
Nov 7, 2015 at 4:10 AM
Avatar
HMAC300
  • ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
if it is braking on it's own it has to be scanned to see if abs is problem or something like the steering sensor is causing it to do this. check for carpeting near pedals especially if it's adjustable pedals as this can cause by simply moving your feet and not touching pedals.tis is really kind of a vague description and if it does that a local pro should physically look at this so he can get a better idea of what is happening. Maybe he'll hook up his scanner and drive it to see if he picks something up odd. this is about the only way you are going to find this problem.
Nov 7, 2015 at 5:59 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.