how to turn off maint.required light
Dec 20, 2010 at 8:41 PM
maintenance required light
2006 TOYOTA TUNDRA
UP-N-OVER
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
MAINTENANCE LIQUID RESETTING PROCEDURE
1. Set the display window to ODO.
2. Turn the ignition switch off.
3. Pressing the reset switch, turn the ignition switch to the ON position (keep pressing for at least 5 seconds .)
4. Reset procedure is completed.
HINT:
* If the ignition switch is turned off during the reset procedure. LCD: off
IND: off
* If the reset switch is pressed off during the reset procedure. LCD: return to ODO
IND: Keep the previous state of reset
1. Set the display window to ODO.
2. Turn the ignition switch off.
3. Pressing the reset switch, turn the ignition switch to the ON position (keep pressing for at least 5 seconds .)
4. Reset procedure is completed.
HINT:
* If the ignition switch is turned off during the reset procedure. LCD: off
IND: off
* If the reset switch is pressed off during the reset procedure. LCD: return to ODO
IND: Keep the previous state of reset
Dec 20, 2010 at 8:57 PM
Advertisement