SPONSORED LINKS

Cranks but will not start

Tiny
VINTEC
  • MEMBER
  • 2006 SUZUKI VITARA
  • 23,780 MILES
Engine code LWR96TF02, 2.0 TD, it just had problem with a hard start and later it failed to start completely.
i have changed the crank sensor and the cam sensor, bought and programmed another ECM power on sensors is okay 5v. Pressure pump is not delivering any fuel and the glow plugs are not getting any heat. No power on them.
SPONSORED LINKS
Monday, November 4th, 2013 AT 12:12 AM

1 Reply

Tiny
KASEKENNY
  • MECHANIC
  • 18,907 POSTS
We need to start with a couple guides to figure out some other possible causes.

First and foremost we need to start with checking for codes.

https://www.2carpros.com/articles/checking-a-service-engine-soon-or-check-engine-light-on-or-flashing

Once we know what codes are there we will know better what is causing the glow plug and fuel issue.

Here is a guide that will help in more general terms on this issue:

https://youtu.be/dCjmRL3p4Cs

Lastly we need to know if the security light is on or flashing when you are trying to start the vehicle. We could just have a theft issue happening.

https://www.2carpros.com/articles/how-to-reset-a-security-system

We don't have a manual on this vehicle engine as it was not offered in the USA but I am sure we can help figure out what is happening based on this information. Thanks
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, December 10th, 2020 AT 7:41 AM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting
GUIDE
Engine Not Starting
Over the past 20 years at 2CarPros we have identified the top problems that are easily fixed. This guide can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links