i installed a battery wrong and blew a fuse. after replacing it the car still wont start. why?

2006 SCION XB
40,000 MILES
Avatar
JOSEALVARADO2
  • MEMBER
  • 3 POSTS
I mixed up the connections when I connected the terminals. I've checkked all the fuses.The fuse was a 40 amp. The motor turns but it doesn't stay on. It sounds like it is out of gas and the check engine light is on.
May 25, 2012 at 6:31 PM
Advertisement
Avatar
ASEMASTER6371
  • ✓Experienced Mechanic
  • 52,796 POSTS
check all the other fuses as well. in most cases there are computer modules that do not survive from voltage spikes from the battery cables on backwards.

you will need help with this from a shop.

Roy
May 25, 2012 at 6:34 PM
Avatar
KHLOW2008
  • ✓Experienced Mechanic
  • 41,814 POSTS
Get a scan doen for the MIL indicating. It could give you a clue what to look for.
May 26, 2012 at 5:54 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.