The heat/AC buttons are loosing their finish. I bought a new set. I need to find out how to replace them.

Here for a cheap price: www. Mit1. Com

Has the problem been resolved?

KHLow -do you have any type of information on this-if you do can you take it. Wrong link above

https://www.2carpros.com/articles/mitchell1eautorepair-car-repair-manuals

All u need to do is, take acc panel out, use a plastic tool or a very small pocket screw driver preferred, to remove front panel cover, put that aside, now take the new ones that u bought & break the tabs off for each button one at a time, so the same button that u took off that is the same one u will be replacing on the control panel just take your time, the only 2 buttons that may be a little difficult to remove is the buttons for the temp adjustment this is where the pocket screw driver comes in handy to pry outer edge & wiggle next side loose, just remember to do them one at a time. Good luck.

Oh by the way the acc panel is just pushed in place so this is where u use the plastic flat tool or even the same pocket screw driver to pry panel out & just unplug the 2 connectors at this back also use the screw driver to release connector locks, good luck again and sorry for the waiting time for the info, sorry that I do not have pics to help u alone, you may need to read post over a few time to get the picture of how to perform repairs.

Please post back if info help at all please, thanks

I could only find this 2 diagrams.