How to move electrical box for battery installation, this is a gxp with a v8.
Jan 14, 2013 at 3:18 PM
2006 PONTIAC GRAND PRIX
ANONYMOUS
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Disconnect the negative battery cable.
Lift the cover of the underhood junction block to access the positive cable nut.
Remove the positive battery cable nut and cable away from the junction block.
Release the tabs and pull the junction block from housing. I see three tabs.
Will that give you enough slack, to do what you want?
Lift the cover of the underhood junction block to access the positive cable nut.
Remove the positive battery cable nut and cable away from the junction block.
Release the tabs and pull the junction block from housing. I see three tabs.
Will that give you enough slack, to do what you want?
Jan 14, 2013 at 6:55 PM
Advertisement