2006 Pontiac G6 Change Oil Filter Adapter Housing Gasket

2006 PONTIAC G6
88,000 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
How do i change the oil filter adapter housing gasket?
Nov 6, 2012 at 7:13 AM
Advertisement
Avatar
STRAILER
  • ASE Certified Mechanic
  • 54,840 POSTS
  • ASE Certified Mechanic
Hello,

I would change the oil as long as you are doing the oil filter adapter.

Here is a guide to help you

https://www.2carpros.com/articles/how-to-change-engine-oil-and-filter

You must lift the car safely

https://www.2carpros.com/articles/jack-up-and-lift-your-car-safely

First the Gasket is Fel-Pro 72423

1. Drain oil.
2. Remove oil filter.
3. Remove the three fasteners retaining the oil filter adapter. One stud. One bolt and, one nut. Remove Adapter and Clean area.
4. Replacement is the reverse of removal.

Here are some diagrams (below)

Please let us know if you need anything else to get the problem fixed.

Cheers, Ken
Oct 4, 2017 at 8:17 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.