how can i realign sliding door on a ldv maxus 2006 BU56EUJ.

2006 ALL OTHER MAKES ALL OTHER MODELS
187,000 MILES
Avatar
THE TYRE TECHNICIAN
  • MEMBER
  • 20 POSTS
I HAVE GOT A USED ROLLER THAT GOES IN THE BOTTOM RAIL AND HINGE THAT WORKED OK OFF THE VAN IT CAME OFF OF.NOW FITTED ON MY VAN THE DOOR STILL LOOKS LIKE ITS GOING TO FALL OFF AND ALSO IMCUNABLE TO ADJUST THE HEIGHT OF THE DOOR ,AND UNABLE TO LOCK AND UNLOCK ,IT LOOKS LIKE THE DOOR NEEDS TWISTING BUT I DON'T KNOW,I HAVE TRIED ADJUSTING THE 2 BOLTS ON THE THE ROLLER AND THE 3 BOLTS ON THE DOOR AND NO MATTER WHAT I DO ITS STILL THE SAME .CAN ANYONE HELP OR SEND A PICTURE OF HOW I CAN REALIGN ,TOO BE HONEST THIS IS A COMPANY VAN BUT I AM RESPONSABLE FOR THE PROPERTY INSIDE SO I NEED TO MAKE SURE THIS DOOR IS LOCKED.
Sep 8, 2012 at 11:44 PM
Advertisement
Avatar
ASEMASTER6371
  • ✓ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
send picture of what you have.

Roy
Sep 9, 2012 at 2:05 AM
Avatar
KHLOW2008
  • ✓ASE Certified Mechanic
  • 41,814 POSTS
  • ASE Certified Mechanic
Leave the roller alone. Loosen then 3 bolts of bracket on door. Lift the door higher than the center line and tighten the bolts and retest. That is the proper way to adjust the height. If the door is too high or too low, repeat. Before the next procedure , mark the present bracket location and adjust according wioth the markings as guide.

If you can send pictures, that would be the best.
Sep 9, 2012 at 11:36 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.