2006 Nissan X Trail Power Steering Pump Driven By Timing Chain There

2006 NISSAN X-TRAIL
145,000 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
as the power steering pump is driven by the timing chain, are there any precautions with regard to the removal of the pump? with regard to disturbing the timing?
Jan 16, 2013 at 11:17 PM
Advertisement
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
it's driven by the drive belt.
REMOVAL

1. Drain power steering fluid from reservoir tank.
2. Loosen drive belt. Refer to "DRIVE BELTS ".
3. Remove drive belt from oil pump pulley.
4. Remove union bolt and hose from oil pump.
5. Remove oil pump fixing bolts, and then remove power steering oil pump.


INSTALLATION

Install in the reverse order of the removal. For tightening torque, refer to "HYDRAULIC LINE".

? Perform the following procedure after installing.
? Drive belt is auto tensioner type. Belt tension adjustment is not necessary.
? Bleed air. Refer to "AIR BLEEDING HYDRAULIC SYSTEM".
Image (Click to enlarge)
Attached Media
Jan 17, 2013 at 4:35 AM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Ask a new question

Frequently Asked Problems for This Vehicle