2006 Nissan Tiida install temp guage

2006 NISSAN TIIDA

65,000 MILES • 1.5L • 4 CYL • FWD • AUTOMATIC

CALBEC

MEMBER
3 POSTS
FOLLOW

I want to install an after market water temp gauge tapping into the water hose but I am not sure which water hose top or bottom to cut & install the pipe for the sender I would like some advice on this please

Apr 19, 2015 at 9:40 AM

Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.

HMAC300

AUTOMOTIVE REPAIR CONTRIBUTOR
48,601 POSTS

if the temp gauge is electric it will need aground wire if installing in a hose. the top radiator hose will be ok but temp gauge will read a little hotter than temp actually is.

Apr 19, 2015 at 12:25 PM

CALBEC

MEMBER
3 POSTS

Thanks for the reply I actually went ahead & cut the bottom hose is it ok to use the bottom hose
For the ground does the wire have to go directly to the pipe or attach to the sender

Apr 19, 2015 at 3:55 PM

HMAC300

AUTOMOTIVE REPAIR CONTRIBUTOR
48,601 POSTS

bottom hose is ok ground wire attachs to sender

Apr 19, 2015 at 4:33 PM

CALBEC

MEMBER
3 POSTS

Hi thanks will continue and see how it works

Apr 19, 2015 at 5:08 PM