SPONSORED LINKS

2006 Nissan Frontier lifters

Tiny
SEGUIN1978
  • MEMBER
  • 2006 NISSAN FRONTIER
  • 4.0L
  • 6 CYL
  • 2WD
  • AUTOMATIC
  • 120,000 MILES
Im putting the lifter cups back on cause I replaced heads and I did not nuber them and I seen that they are diffrent heights do the shorter one go on the intake or exaust
Sunday, July 5th, 2015 AT 2:04 PM

1 Reply

Tiny
KHLOW2008
  • MECHANIC
  • 41,814 POSTS
If you look inside the lifter cups, you would see stamped marks. Clean if necessary to see them. Those marked with U are for the intake.

Those marked with N are for the Exhaust. However different numbering of the lifters indicates different thickness and means valve clearances would be affected. After installation, you would need to check the valve clearances and move the lifters around to get the correct clearance.

Valve clearance for intake are 0.3 mm and exhaust is 0.33 mm.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Wednesday, July 8th, 2015 AT 10:01 AM

Please login or register to post a reply.

Related Camshaft Lifter Replace/Remove Content

VIEW MORE

Sponsored links