Giving me the code for the sensor 1 bank 1

2006 NISSAN ALTIMA
190,000 MILES • 2.5L • 4 CYL • FWD • AUTOMATIC
Avatar
RAYMOND25840
  • MEMBER
  • 2 POSTS
I have replaced both O2 sensors, mass air flow sensor, throttle body, flex pipe, and my catalytic converter and I am getting the same code. I have erased it and put 2-3 drive cycles on my car and the check engine light keeps coming on. Giving me the code for the sensor 1 bank 1. Do I have to do the idle re-learn again or drain the ecm? I don't know what else could be left to do to fix this problem.
Oct 27, 2015 at 5:21 AM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
send the code it may be a blown fuse as some have fuses underhood or a poor connection or short
Oct 27, 2015 at 6:11 AM
Avatar
STRAILER
  • ✓ASE Certified Mechanic
  • 54,832 POSTS
  • ASE Certified Mechanic
Yes, it is fuse #8 in the fuse panel on the left side of the dash which runs the oxygen sensor heater, here is a guide to help and the fuse locations:

https://www.2carpros.com/articles/how-to-check-a-car-fuse

That should fix the problem. Check out the images (below). Let us know if you need anything else.
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Jan 23, 2024 at 4:38 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.