thermostat replacement

2006 KIA SPORTAGE
98,000 MILES • 2.0L • AUTOMATIC
Avatar
CASEY269
  • MEMBER
  • 1 POST
Where do I find the thermostat and what do I have to remove to get to it. I don't know if is the top hose or the bottom hose . If it is the top hose I will have to remove stuff ( WHAT?). the car dose not heat what else could it be and would i find it and can i check it without having to bur something.


Jan 15, 2014 at 8:18 AM
Advertisement
Avatar
STRAILER
  • ASE Certified Mechanic
  • 54,837 POSTS
  • ASE Certified Mechanic
Hello,

The thermostat is located at the end of the upper hose toward the engine.

Here a video on the job.

https://youtu.be/EOv72WPf7Mo

Here is a guide that will give you an idea of what to do as well.

https://www.2carpros.com/articles/replace-thermostat

Here are some diagrams to help you see what I am talking about for your car I have included both 4 and 6 cylinder engines just in case some one else needs them.

Check out the diagrams (Below). Please let us know what happens.
Nov 8, 2017 at 3:51 PM
Avatar
2CP-ARCHIVES
  • MEMBER
  • 4,540 POSTS
bad thermostat in my car, live on hot climate, should i remove it for good?
Feb 9, 2021 at 5:44 PM (Merged)
Avatar
CJ MEDEVAC
  • ASE Certified Mechanic
  • 11,004 POSTS
  • ASE Certified Mechanic
in order for your engine to run efficiently the computer must recognize a constant operating temperature removing the thermostat might keep the engine "too cool"---the computer might remain in "closed loop" this is sorta a quick explanation of the loops there are two "loops"---"open" and "closed" open means the sensors are giving the computer "real time" info, example: o2 sensor is telling the computer the oxygen content in the exhaust so it can adjust the injectors to get the most efficient "burn" possible being that it takes a little while for the o2 to warm up to "transmit" info...how does the engine run? same goes for "temperature sensors---it must get to operating temperature before it is "sensed" by the computer the engine runs "closed loop" during the time it awaits for sensor to "come on line"---which means the computer has "preset" values programmed into it--it runs off of them, until all sensors come on-line.....closed loop sorta means, the engine components are "fed false info", that will make the engine run---this "loop" is not efficient, usually you will notice it runs rich--mpg goes down!

this is not only true for the o2 sensors, but other sensors not working will cause this (staying in closed loop)---closed loop is basically "default"

"open loop" is when the computer runs the engine off of "right now!"--"real time" information----basically the present environment is being sensed by the computer---barometric pressure/ oxygen content in the fuel/ engine temperature/ air movement into the engine/ etc...etc. with this info, the computer does not rely on "preset/ default" information to make inefficient "fuel decisions"----it can now use the "present environmental info" to make efficient fuel decisions giving your vehicle peak performance

the medic
Feb 9, 2021 at 5:44 PM (Merged)
Avatar
2CP-ARCHIVES
  • MEMBER
  • 4,540 POSTS
Do you have to have a thermostat? Will it run hot with out it?
Feb 9, 2021 at 5:44 PM (Merged)
Avatar
2CP-ARCHIVES
  • MEMBER
  • 4,540 POSTS
Yes you should have the thermostat in, you can run it with out thermostat too, but the issue is that will run rich using a lot of gas and it will effect the emission system.
Feb 9, 2021 at 5:44 PM (Merged)
Avatar
FIXITMR
  • ASE Certified Mechanic
  • 9,990 POSTS
  • ASE Certified Mechanic
removing it will not cause car to overheat. it should run cooler in fact. in warm climate it should not cause excessive gas useage.
Feb 9, 2021 at 5:44 PM (Merged)
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.