rotors on a 2006 hummer h3

2006 HUMMER H3

65,000 MILES • 5 CYL • 4WD • AUTOMATIC

SHAFERS1

MEMBER
2 POSTS

I went to get an oil change and they told me i need brake pads and rotors for the front. I checked the rotors out myself and they dont have any groove marks. They have rust pitted in them I guess thats why they said I need to change them. I've changed other rotors and brake pads so I thought I could do it myself. My question is do I need to change the rotors just because of the rust? if so how do i remove the rotors? just like any other rotors I have removed? Thanks Rick

Mar 7, 2011 at 6:37 PM

SATURNTECH9

✓ASE Certified Mechanic
30,869 POSTS

If the rotor's are pitted too badly you will have to change them also if they measured them and they were too thin too turn that is another reason why they might have said they needed to be replaced.Your best bet would be to take the rotor's off and take them to a auto part's store or machine shop that turn's rotor's and see if they can be saved.If not you will have to replace them.The rotor's come off easy you just remove caliper etc there pop offs.

Mar 16, 2021 at 10:52 AM

SHAFERS1

MEMBER
2 POSTS

Thanks for the reply.

Mar 16, 2021 at 10:52 AM

SATURNTECH9

✓ASE Certified Mechanic
30,869 POSTS

Your welcome that's what were here for.

Mar 16, 2021 at 10:52 AM

Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.