misfire come and go

2006 HONDA PILOT
78,000 MILES • 6 CYL • 2WD • AUTOMATIC
Avatar
ELESAGUIS
  • MEMBER
  • 1 POST
i got a '06 pilot 2wd exl, it's been having a random misfires now and then. i got the valves adjusted..but again the lite came on ans it says misfire on po301...i'm getting frustrated, pls. help
Nov 30, 2010 at 5:06 PM
Advertisement
Avatar
RASMATAZ
  • ✓Experienced Mechanic
  • 75,992 POSTS
P0301 is a misfire at cyl no.1 -check the spark, compression and injector
Nov 30, 2010 at 5:12 PM
Avatar
HONDA TECH 1818
  • ✓Experienced Mechanic
  • 536 POSTS
It could be two problems
1st- The PGM-FI software misinterprets inputs, causing the
DTCs to set. Need to bring it to the dealership and have them update the PGM-Fi software.
2nd- If the engine taps/raps loudly when going into VCM mode it will causes misfire codes. The rear bank VCM rocker arm pins sticking. In this case the rear intake and exchaust rocker arms needs replacement.

Most likely you only need the PGM-FI software update.
Dec 2, 2010 at 11:44 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.