I,want to erase P113 code on 2005 Odyssey using my 5 year old Actron OBD scanner.

2006 HONDA ODYSSEY
134,000 MILES
Avatar
PINUR
  • MEMBER
  • 1 POST
I will not erase it. It had erased misfires codes but not this one. Should I get updated scanner o or it is a code like on srcewed german cars only the dealer can erase?
Thank you
Steve
Oct 8, 2011 at 12:51 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
that code p0113 is for high voltage on the iat-idle air valve. if you change teh vlave, you need to run engine at 3000 rpm with headlight,a/c/rearewindow defroest OFF. until coolant fan kicks on, then let it idleafter it idles turn on everything and let it idle like that.
Oct 8, 2011 at 1:54 PM
Advertisement
Avatar
KHLOW2008
  • CAR REPAIR CONTRIBUTOR
  • 41,814 POSTS
If the problem had not been rectified, you would not be able to erase the code as it would recur immediately.
Oct 8, 2011 at 4:26 PM