why are the RPMs going up and down after i changed the starter?

2006 HONDA ACCORD
103,000 MILES
Avatar
LEONARDOABALLE
  • MEMBER
  • 1 POST
i have an 06 accord 2.4 and it was in perfect conditions with the RPM, one day my car wasnt starting, and it turned out to be the starter. a friend changed it for me and to install it he had to remove the manifold to get to the starter now when i went to turn the car on there is a check engine code P0122 and the RPMs are high on 2000 on park and then it after 2 min. it goes up and down from 2000 rpm to 1000 rpm. Can anyone help?
Sep 6, 2012 at 6:38 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
ASEMASTER6371
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 52,796 POSTS
check coolant level. low leval will cause this issue

Roy
Sep 7, 2012 at 12:36 AM
Advertisement
Avatar
KHLOW2008
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 41,814 POSTS
Check for vacuum leakages. Removing the manifold means the possibility of it occuring.
Sep 7, 2012 at 4:48 AM
Avatar
KHLOW2008
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 41,814 POSTS
Check the TPS wire connector. It could be loose or not plugged in.
Sep 7, 2012 at 4:52 AM