I have bad brakes now can't seem to fix problem this just started to happen when I just replaced front rotors and brakes.
Nov 7, 2013 at 5:20 PM
After replacing brake rotors and pad when I hit the brakes the connection from the EVAP canister hose to the Y connector sprays fluid
2006 FORD E-SERIES VAN
JAMHELD
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Good evening,
The ECAP line is a vapor line and has no fluid in it.
What concerns me is the lines at the master cylinder. If there is a leak there, it will spray brake fluid and it may be at this connection. Have someone push the pedal down and you watch it for a leak from a brake line.
https://www.2carpros.com/articles/how-to-replace-a-brake-master-cylinder
Roy
The ECAP line is a vapor line and has no fluid in it.
What concerns me is the lines at the master cylinder. If there is a leak there, it will spray brake fluid and it may be at this connection. Have someone push the pedal down and you watch it for a leak from a brake line.
https://www.2carpros.com/articles/how-to-replace-a-brake-master-cylinder
Roy
Apr 17, 2020 at 4:26 PM
Advertisement