My cigar lighter doesn't work?

2006 FORD FIVE HUNDRED
27,500 MILES
Avatar
RAVEESHROCK
  • MEMBER
  • 1 POST
Hi

I own a Ford Fiesta 1.4 zetec climate (06 model). I left my car charger plugged in the cigar lighter socket overnight and the next morning I found the tip of the charger broken. I bought a new charger, but this time the cigar lighter socket was not working. I thought may be a fuse had blown off so I checked the fuse box under the glove box and located the correct fuse socket from the fuse diagram. Surprisingly, there was no fuse fitted for the cigar lighter. I thought may be it was blown out so I thought of replacing it with a new 15 amp fuse.The fuse is turning out to be too loose for the socket. I tried to fit it in other sockets and it would fit in well? it seems the cigar lighter never had a fuse at the first place and therefore no provision of a fuse socket in the fuse box. Is there any other fuse box located within the car? Please help? What could be the issue?
Sep 27, 2011 at 11:43 PM
Advertisement
Avatar
JACOBANDNICKOLAS
  • ASE Certified Mechanic
  • 110,194 POSTS
  • ASE Certified Mechanic
First, make sure nothing is stuck in the lighter that can cause it to short. As far as the lighter, it is a fused item. There has to be a fuse. The only way there couldn't have been a fuse is if the power is coming from a different circuit (someone rewired it). Follow the power supply on the rear of the lighter to where power comes from to determine where power came from.
Sep 28, 2011 at 1:21 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.