Bearing hub replacement?

Tiny
SMITH403
  • MEMBER
  • 2006 DODGE DURANGO
  • 4.7L
  • V8
  • 4WD
  • AUTOMATIC
  • 95,500 MILES
I'm hearing a popping/grinding noise while taking a slow turn, such as pulling into a driveway or parking space. It also happens when backing out, then straightening to drive. I just replaced brake pads, rotors, LF wheel bearing, and front axel assembly. I also had the u-joints checked. Thinking it may be in the suspension at this point. I think I need new bearing hubs.
Tuesday, April 21st, 2015 AT 8:04 PM

1 Reply

Tiny
KASEKENNY
  • MECHANIC
  • 18,907 POSTS
This is most likely a bearing noise but here is a guide on grinding noises that will help confirm this:

https://www.2carpros.com/articles/vehicle-grinding-noise

However, I agree that this is a bearing noise so here is a guide that will help with step by step instructions on how to replace this:

https://www.2carpros.com/articles/bearing-hub-replacement

Can you clarify which bearing you replaced when you say you replaced the left front wheel bearing? That is the hub bearing so if the noise on the left side?

Below is the process from the manual on how to replace this. Please let us know if this is what you replaced and if it is we can dig further.

Thanks
Was this
answer
helpful?
Yes
No
Saturday, July 3rd, 2021 AT 6:44 PM

Please login or register to post a reply.

Sponsored links