2006 Chrysler Sebring Change Out Power Mirror Switch

2006 CHRYSLER SEBRING
60,000 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
How do I change out a power mirror switch?
Oct 30, 2012 at 10:08 AM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic

REMOVAL

1. Disconnect and isolate the battery negative cable.
2. Using a trim stick, pry the trim bezel from the instrument panel.
3. Disconnect wire harness connector from switch.
4. Remove switch from bezel.


INSTALLATION

1. Install switch to trim bezel.
2. Connect wire harness connector to switch.
3. Install trim bezel to instrument panel.
4. Connect battery negative cable.

Oct 30, 2012 at 1:20 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.