2006 Chrysler PT Cruiser P0882

Tiny
ZEMORZEMOR
  • MEMBER
  • 2006 CHRYSLER PT CRUISER
  • 2.4L
  • FWD
  • AUTOMATIC
  • 95,000 MILES
I have a code p0882. I checked the wiring diagram and the procedure to resolve the problem. The manual says to check the T15 circuit for open or shorted to ground. The circuit is not shorted or open so now I have two more option either the TIPM or the computer is bad how can I verify it?
Sunday, July 19th, 2015 AT 4:41 PM

5 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check to see if there are any tpim codes
it still can be pcm though
Was this
answer
helpful?
Yes
No
+3
Wednesday, July 22nd, 2015 AT 12:17 PM
Tiny
ZEMORZEMOR
  • MEMBER
  • 486 POSTS
There is no tipm codes. Also I did PCM voltage drop test. The ground circuits was between 0.01v to 0.05v drop however the power side was 250mv drop is it excessive drop?
Was this
answer
helpful?
Yes
No
-1
Wednesday, September 9th, 2015 AT 8:20 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
If no tpim codes and no short or open in trans control circuit then it may be the pcm or bad connections. Try testing by wiggling wires also. I've never done a drop test so can't make a statement on that.
Was this
answer
helpful?
Yes
No
+5
Thursday, September 10th, 2015 AT 6:15 AM
Tiny
ZEMORZEMOR
  • MEMBER
  • 486 POSTS
Yesterday I had another code p0562 low system voltage how can I troubleshoot it
Was this
answer
helpful?
Yes
No
+1
Friday, September 11th, 2015 AT 6:39 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
562 is low battery voltage, check for condition including load test and see if it's charging. May be a fusible link to alternator. Most places check for free
Was this
answer
helpful?
Yes
No
-1
Friday, September 11th, 2015 AT 7:09 AM

Please login or register to post a reply.

Sponsored links