misfire

2006 CHRYSLER PT CRUISER
85,000 MILES • 4 CYL • 2WD • AUTOMATIC
Avatar
RAYCONIFER
  • MEMBER
  • 1 POST
getting a code reading of multiple misfire 2006 pt cruiser 2.4, timimg belt and waterpump and tensioner and idler also replaced.was the timing set wrong
Dec 13, 2010 at 8:13 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
JACOBANDNICKOLAS
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 110,190 POSTS
It could be the timing, a bad crans sensor, bad coil, bad fuel pressure, vacuum leaks... are there any other codes that are present?
Dec 13, 2010 at 8:17 PM
Advertisement
Avatar
JAFER
  • MEMBER
  • 15 POSTS
Hi,rayconifer . please when you have replaced the new parts ( timing belt and waterpump and.....) did you remove the coil and cam shift plugs ? if yes ! ok rayconifer ,now remve the coil plug and cam shift plug ,put the coil plug in the cam shift place and oppisite , Run the engain . please E mail mi on jafmab@ yahoo.com answered by jafer .
Dec 15, 2010 at 7:20 AM