2006 Chevrolet Suburban cruise control

2006 CHEVROLET SUBURBAN
165,000 MILES • 5.3L • V8 • 2WD • AUTOMATIC
Avatar
PENZFAN
  • MEMBER
  • 11 POSTS
CC will not turn on when I depress the button on the end of the lever. I slid the on-off lever to off and back on also. I have checked the fuse in the box next to the driver door. Didn't see a fuse in the box under the hood. CC worked fine yesterday.
Any ideas? Thanks guys...
Sep 29, 2015 at 2:20 PM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
check fuse in pic then have scanned for codes may be control module a pro will have to do that. it also may be the cruise switch.
Sep 30, 2015 at 7:14 AM
Avatar
PENZFAN
  • MEMBER
  • 11 POSTS
Hmac300, Thanks for the reply. The fuse is good and there are no DTC codes on the code reader.
Sep 30, 2015 at 6:25 PM
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
if you used an auto parts code reader it won't pick it up. only a pro one will that mechanics use. check for signals to module and stuck brake switch or sending a signal to srop it can also be the multifunction switch.
Oct 1, 2015 at 6:57 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.