2006 Chevy Cobalt Front end knocking when going over bumps or rough roads

2006 CHEVROLET COBALT
83,000 MILES • 4 CYL • FWD • AUTOMATIC
Avatar
DEDUNN
  • MEMBER
  • 1 POST
I have a 2006 Chevy Cobalt LT Coupe and my front left side of car makes knocking sound as if something is lose when I go over rough roads, bumps, and potholes. What is causing this? Also, my car putters when in park and goes through a quarter tank of gas traveling at less than 20 miles and I just performed a tune up with spark plugs and wires. What could be causing this? I have over 83,000 miles on this car and bought it used.
Mar 13, 2011 at 2:50 AM
Advertisement
Avatar
MHPAUTOS
  • ASE Certified Mechanic
  • 31,937 POSTS
  • ASE Certified Mechanic
Check that there is no oil stains on the suspension strut and when you bounce that corner it does not feel overly soft, this if so will be a faulty strut, also have the suspension on that side inspected for worn components, things like sway bar links, and ball joints and inner control arm bushes, as for the tune issue, did you get a compression test done, did you make sure that the plug gaps are correct, check for vacuum leaks and run a scan for any unresolved fault codes, start here.
Mar 13, 2011 at 10:15 AM
Avatar
MINDISUE89
  • MEMBER
  • 2 POSTS
Noises from passenger front end... Someone tell me what needs to be replaced
Mar 23, 2017 at 9:16 PM
Avatar
MHPAUTOS
  • ASE Certified Mechanic
  • 31,937 POSTS
  • ASE Certified Mechanic
I would start with replacing the tie rod end, in you pic the boot has split and grease is leaking, this may not be the noise you are hearing, but this needs replacing first.
Mar 24, 2017 at 3:47 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.