2006 cadillac dts: CEL came on for Bank 1 O2 sensor per scan tool. Replaced O2 sensor and scan showed flat line. Drove car for less than 1 mile and CEL for same O2 sensor and output reading on scan tool showed erratic output. Bad ground, Bad ECM what could it be? Thank you
SPONSORED LINKS
Wednesday, June 22nd, 2011 AT 5:25 PM
8 Replies
WRENCHTECH
MECHANIC
20,761 POSTS
What is the exact code number?
Was this
answer
helpful?
Yes
No
Wednesday, June 22nd, 2011 AT 5:44 PM
BGPURSER
MEMBER
5 POSTS
I don't have the code, since I had borrowed a scan tool. The code was exact for the Bank 1 O2 sensor. I should have wrote it down, but I thought it was going to be a simple fix.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, June 22nd, 2011 AT 6:29 PM
BGPURSER
MEMBER
5 POSTS
Almost seems like a capacitor issue, but I'm guessing.
Was this
answer
helpful?
Yes
No
Wednesday, June 22nd, 2011 AT 6:29 PM
WRENCHTECH
MECHANIC
20,761 POSTS
You're way out in left field with this. We need the exact code number to help you. There are dozens of different O/2 codes.
Was this
answer
helpful?
Yes
No
Wednesday, June 22nd, 2011 AT 8:54 PM
BGPURSER
MEMBER
5 POSTS
Alright, I'll have to go get it rescanned. The cadillac service mechanic is the one who told me what the code meant and how to reset it after it threw the code again after replacing the O2 sensor. It'll take me a day to get it done.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, June 22nd, 2011 AT 9:20 PM
WRENCHTECH
MECHANIC
20,761 POSTS
I don't even understand what your current problem is. The 0/2 reading is supposed to fluctuate constantly.
Was this
answer
helpful?
Yes
No
Wednesday, June 22nd, 2011 AT 9:35 PM
BGPURSER
MEMBER
5 POSTS
Kept throwing the same code for O2 sensor even after it was replaced.
Was this
answer
helpful?
Yes
No
Wednesday, June 22nd, 2011 AT 9:46 PM
WRENCHTECH
MECHANIC
20,761 POSTS
There are dozens of different 0/2 codes and most of them are not caused by faulty sensors. Get the code number.