SPONSORED LINKS

Heater blows cold air

Tiny
LEONEAL
  • MEMBER
  • 2006 BUICK LUCERNE
  • 117,000 MILES
I have installed a new radiator, new thermostat, new hoses, and back flushed the heater core. All of the blend door actuators appear to be working properly, What am I overlooking. Could it be the control unit inside the car?
Monday, October 21st, 2013 AT 10:35 AM

2 Replies

Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 47,702 POSTS
Yes it sounds like it is to be sure let's remove the temperature blend door actuator and with the car running and the system on move the air door pivot you should get it to go from how to cold by moving the pivot.

https://www.2carpros.com/articles/replace-blend-door-motor

This guide can help as well

https://www.2carpros.com/articles/car-heater-not-working

Here are some guides that will help you get the job done (below).

Please let us know what happens.

Cheers, Ken
Images (Click to make bigger)
Thumb
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Wednesday, November 22nd, 2017 AT 5:55 PM
Tiny
KATHYISTHEBEST
  • MEMBER
  • 1 POST
  • 2007 BUICK LUCERNE
  • V8
  • 2WD
  • AUTOMATIC
  • 115,000 MILES
That was it ! I replaced the actuator and BAM all fixed thanks 2Carpros!
Was this
answer
helpful?
Yes
No
+1
Wednesday, November 22nd, 2017 AT 5:55 PM (Merged)

Please login or register to post a reply.

Related Heater Not Working Content

Heater Not Working
VIDEO
Heater Not Working
Instructional repair video
Heater Not Working
GUIDE
Heater Not Working
Step 1 - A heater cannot operate unless the engine is full of coolant/antifreeze. If coolant level is low check the system for leaks.

Sponsored links