2006 All Other Makes All Other Models Trailblazer ss engine swap

LARRYSS

MEMBER
2006 ALL OTHER MAKES ALL OTHER MODELS
6.0L
V8
2WD
AUTOMATIC
100,000 MILES

Hi I have a ss trailblazer 06 took engine out and put it in a 08 ss trailblazer. This is at a shop too not on my own. Now comes back crank sensor wont start what can be done

Friday, June 26th, 2015 AT 9:59 AM

9 Replies

MHPAUTOS

MECHANIC
31,937 POSTS

You probably do have a faulty crank angle sensor, change it and see if that fixes the problem.

SPONSORED LINKS

Was this

answer

helpful?

Yes

Friday, June 26th, 2015 AT 6:13 PM

LARRYSS

MEMBER
4 POSTS

The shop says it has something to do with reluctor wheel

Was this

answer

helpful?

Yes

Friday, July 10th, 2015 AT 11:25 AM

MHPAUTOS

MECHANIC
31,937 POSTS

Would like to know why they feel it is this or more commonly called the tone wheel, this is the segmented ring that rotates past the sensor which gives the sensor its pulse reading, normally the sensor is at fault, I would like to know there reasoning for their decision.

Was this

answer

helpful?

Yes

Friday, July 10th, 2015 AT 7:05 PM

DEERCRUSHER

MEMBER
1 POST

I would think that the problem is that in 2006 they used a 24x reluctor wheel and then in 2007 to 2009 they changed over to a 58x reluctor wheel. The reluctor wheels are pressed on, so the easiest way to rectify your situation is to purchase an adaptor that changes the signal of the 24x to that of a 58x wheel.

Was this

answer

helpful?

Yes

Saturday, January 2nd, 2016 AT 9:38 PM

MHPAUTOS