2005 Volkswagen Polo Recently Cellular Phone Lying On Back Car Floor Behind

2005 VOLKSWAGEN POLO
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
Recently, my cellular phone was lying on the back car floor behind the drivers seat. It accidentally fell into the open plastic air/vent duct that opens up into the floor behind the drivers seat. How can I take it out as it moved toward the inner part of the duct whilst driving.

Regards
M
Oct 16, 2012 at 11:32 AM
Advertisement
Avatar
ASEMASTER6371
  • ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
you will have to remove the duct face to gain acess to the duct. use a coat hanger with end hooked to retrieve it.

Roy
Oct 16, 2012 at 11:43 AM
Avatar
EXOVCDS
  • ASE Certified Mechanic
  • 1,883 POSTS
  • ASE Certified Mechanic
Have a look at the attached image... without removing the seat , carpet & duct, you will have to use some kind of
long tool that has adhesive at the end so that it sticks to the phone.

It is hard to tell from the image if there is a "step down" in the duct (where #2 attaches to the front piece), if yes, then
that will make it difficult to fish the phone out.

If you need more info (green text in image), let me know.

Good luck.

Thomas
Oct 16, 2012 at 5:14 PM
Avatar
EXOVCDS
  • ASE Certified Mechanic
  • 1,883 POSTS
  • ASE Certified Mechanic
Found another picture... does the dash layout look correct?

It looks like a straight connection. If this does not match your vehicle, can you post a
picture of what you see under the seat?

Thomas
Oct 16, 2012 at 5:32 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.