How to remove the back seat?

70,000 MILES
Avatar
MCGHEE
  • MEMBER
  • 1 POST
I need to disassemble the entire rear interior pretty much but can figure out how to remove the seat cushion or back rests. Getting the paneling off should be cake but to do that the seat needs to go. I tried to pull it out like instructed for older models, but there's something on either side that's holding it in place and I don't know what it is, nor have I been able to find any info on how-to
Jun 9, 2012 at 1:28 AM
Advertisement
Avatar
KHLOW2008
  • ✓Experienced Mechanic
  • 41,812 POSTS
The cushion has to come off first. If there are no bolts/screws or clips holding the front portion, check the rear central part. You need to delve your hands inbetween the cushion and backrest to get at it. If you are lucky and there are no bolts there, pull at the cushion from rear at both ends to get the rear portion out first. You can then flip the cushion forward and pull it of their hook.

The rest should be easy.
Jun 9, 2012 at 7:50 AM
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
1. REMOVE REAR SEAT CUSHION ASSY
a. Pull up the 2 front portions of the seat cushion, then remove it.

NOTE: The cushion frame deforms easily. To avoid deforming the seat cushion, place your hands near the hook as shown in the illustration, and then pull up on
the seat cushion. Do the same for the other hook.
Jun 9, 2012 at 7:54 AM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle