Problems with the shifter

2005 NISSAN MURANO
65,000 MILES
Avatar
MAUSER_MITCH
  • MEMBER
  • 3 POSTS
When you look from the interior of the vehicle and see the shifter assembly, and try to shift into any gear it seems to bind up and not want to shift. when i looked at it a little closer without tearing it all apart, i noticed that there is a belt there that the shifter slides on up by the prnd plate. when you try to shift it looks like the belt is binding up and causing shifting issues, as well as raising that plastic plate up. is there any way to replace that without needing to go to the dealership?
Aug 6, 2012 at 3:04 PM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
if you can point out what you are talking about then it would be easier or let us know by number. but this may need a shifter and that may only be available at the dealer.
Image (Click to enlarge)
Professional Diagram for 2CarPros Members
Click here to log in and view diagram.
Aug 6, 2012 at 3:20 PM
Avatar
MAUSER_MITCH
  • MEMBER
  • 3 POSTS
i will look tonight and post a pic.
Aug 6, 2012 at 3:28 PM
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
ok if you can use the chart that would be better but ok
Aug 6, 2012 at 3:29 PM
Avatar
MAUSER_MITCH
  • MEMBER
  • 3 POSTS
It looks like its in the A/T Console Finisher.
Aug 6, 2012 at 3:35 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.