I have a 05 maxima i got a code of p0304.So i changed the plugs #4 coil,and i still get the code P0304.so my thing is to change #4 injetor?
Sep 18, 2012 at 5:49 PM
how do u change out a furl injector?
2005 NISSAN MAXIMA
BRANDONB1
- MEMBER
- 8 POSTS
Advertisement
SATURNTECH9
- ✓ASE Certified Mechanic
- 30,869 POSTS
Lets stop replacing things and start checking things how bad does it miss at idle and in general on that cylinder?
Sep 18, 2012 at 5:59 PM
before i changed the plugs,coil it was missing where u could feel it in the driver seat. now that i changed those items its not as bad.
Sep 18, 2012 at 6:21 PM
KHLOW2008
- ✓ASE Certified Mechanic
- 41,814 POSTS
You should have swapped the coils instead of replacing all. Swap the number 4 injectr with another if you must.
Sep 18, 2012 at 6:22 PM
I only changed the #4 coil.Ok So swapping the injector wouldn't hurt anything? And when i do i just buy the O rings?
Sep 18, 2012 at 6:32 PM
SATURNTECH9
- ✓ASE Certified Mechanic
- 30,869 POSTS
That wouldnt be a bad idea to replace oring but sometimes its hard to find the correct one in stock.Have reused the orings on them before just inspect them for cracking splittings etc.Also make sure you clean up the area before removing any injectors.
Sep 18, 2012 at 7:21 PM
ok thanks,I'll swap #4 to #6 And see what happens.And when, i do the swap and there's a change they its my #4 injctr was bad??
Sep 18, 2012 at 8:02 PM
SATURNTECH9
- ✓ASE Certified Mechanic
- 30,869 POSTS
Or its just clogged.
Sep 18, 2012 at 8:40 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.