Nissan Altima

Tiny
DOUGZIP
  • MEMBER
  • 2005 NISSAN ALTIMA
  • 4 CYL
  • FWD
  • MANUAL
  • 143,000 MILES
I just got a code on my 2005 Nissan Altima 2.5 that said my crankshaft&camshaft sensor's were bad. I replaced both of them and the car ran grate for two days now its doing the same thing as before. IT runs good but there is a odd sound coming from the front passenger side of the motor. Now I get a p0420 saying the O2 sensor is bad. I was wondering if the sensor could cause this noise. Thank you for any help you can give me
Saturday, April 16th, 2011 AT 11:24 PM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Here is the chart that nissan puts out. Your converter loses temp is a 420 code. Your cam/crank sensor could be a dirty battery cables or the sensors may have gone out of phase. Also check for poor connections poor grounds or shorted wires.
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
Saturday, April 16th, 2011 AT 11:59 PM

Please login or register to post a reply.

Related Oxygen Sensor Replace/Remove Content

Oxygen Sensor Replacement
VIDEO
Oxygen Sensor Replacement
In­struc­tional re­pair video
Oxygen Sensor Replacement
GUIDE
Oxygen Sensor Replacement
An oxy­gen or lambda sen­sor is used to de­ter­mine the en­gine ex­haust mix­ture which can then be con­trolled by the com­puter. These sen­sors are equipped with a heater that can...
VIEW MORE